? rgp10a thru rgp10m vishay semiconductors formerly general semiconductor document number 88700 www.vishay.com 28-feb-02 1 glass passivated junction fast switching rectifier reverse voltage 50 to 1000v forward current 1.0a patented* 0.107 (2.7) 0.080 (2.0) 0.034 (0.86) 0.028 (0.71) dia. 1.0 (25.4) min. 1.0 (25.4) min. 0.205 (5.2) 0.160 (4.1) dia. note: lead diameter is for suffix "e" part numbers 0.026 (0.66) 0.023 (0.58) maximum ratings & thermal characteristics ratings at 25 c ambient temperature unless otherwise specified. rgp rgp rgp rgp rgp rgp rgp parameter symbol 10a 10b 10d 10g 10j 10k 10m unit maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current 0.375" (9.5mm) lead length at t a =55 c i f(av) 1.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 30 a maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length t a =55 c i r(av) 100 a typical thermal resistance (note 1) r ja 55 c/w operating junction and storage temperature range t j ,t stg -65 to +175 c electrical characteristics ratings at 25 c ambient temperature unless otherwise specified. rgp rgp rgp rgp rgp rgp rgp parameter symbol 10a 10b 10d 10g 10j 10k 10m unit maximum instantaneous forward voltage at 1.0a v f 1.3 v maximum dc reverse current t a =25 c 5.0 at rated dc blocking voltage t a =150 c i r 200 a maximum reverse recovery time i f =0.5a, i r =1.0a, i rr =0.25a t rr 150 250 500 ns typical junction capacitance at 4.0v, 1mhz c j 15 pf notes: (1) thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, p.c.b. mounted do-204al (do-41) features plastic package has underwriters laboratories flammability classification 94v-0 high temperature metallurgically bonded construction cavity-free glass passivated junction capable of meeting environmental standards of mil-s-19500 for use in high frequency rectifier circuits fast switching for high efficiency 1.0 ampere operation at t a =55 c with no thermal runaway typical i r less than 0.1 a high temperature soldering guaranteed: 350 c/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension mechanical data case: jedec do-204al molded plastic over glass body terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.012 oz., 0.3 g * glass-plastic encap- sulation technique is covered by patent no. 3,996,602, and brazed-lead assembly by patent no. 3,930,306 dimensions in inches and (millimeters)
rgp10a thru rgp10m vishay semiconductors formerly general semiconductor www.vishay.com document number 88700 2 28-feb-02 ambient temperature ( c) fig. 1 ?forward current derating curve average forward rectified current (a) fig. 3 ?typical instantaneous forward characteristics instantaneous forward voltage (v) instantaneous forward current (a) percent of rated peak reverse voltage (%) instantaneous reverse current ( a) fig. 4 ?typical reverse characteristics fig. 6 ?typical transient thermal impedance number of cycles at 60 h z t, pulse duration (sec.) fig. 2 ?maximum non-repetitive peak forward surge current forward surge current (a) reverse voltage (v) junction capacitance (pf) transient thermal impedance ( cw) fig. 5 ?typical junction capacitance 25 50 75 100 125 150 175 0 0.25 0.5 0.75 1.0 resistive or inductive load 0.375" (9.5m m) lead length 1 10 100 0 10 20 30 t j = t j max. 8.3ms single half sine-wave (jedec method) 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1 10 t j = 25 c pulse width = 300 s 1% duty cycle 0 20 40 60 80 100 0.01 0.1 1 10 20 1 10 100 1 10 100 t j = 25 c f = 1.0mh z vsig = 50mvp-p 0.01 0.1 1 10 100 0.1 1 10 100 t j = 25 c t j = 75 c t j = 125 c ratings and characteristic curves (t a = 25 c unless otherwise noted)
|